Learn about boards that can be configured as IoT devices in Arduino Cloud.
In this article:
- Arduino devices with Arduino Cloud support
- Third-party devices with Arduino Cloud support
- Manually configure a device without support
Tip
Many boards without support for IoT features can still be used in the Cloud Editor. See Boards compatible with the Cloud Editor.
Arduino devices with Arduino Cloud support
- Arduino GIGA R1 WiFi
- Arduino MKR GSM 1400
- Arduino MKR NB 1500
- Arduino MKR WAN 1300
- Arduino MKR WAN 1310
- Arduino MKR WiFi 1010
- Arduino Nano 33 IoT
- Arduino Nano ESP32
- Arduino Nano RP2040 Connect
- Arduino Nicla Vision
- Arduino Opta RS485
- Arduino Opta WiFi
- Arduino Portenta C33
- Arduino Portenta H7
- Arduino Portenta H7 Lite Connected
- Arduino Portenta X8
- Arduino UNO R4 WiFi
Third-party devices with Arduino Cloud support
Manually configure a device without support
Only supported devices can automatically be configured by Arduino Cloud when setting up your device. However, any device that runs Python, MicroPython or NodeJS can be manually integrated using Arduino libraries.
Manually configure a device for Arduino Cloud
-
For a list of supported models, go to the Devices tab and click Add. Then click Set up a 3rd Party device and open the Select model dropdown for ESP32 or ESP8266. ↩︎ ↩︎
