Arduino IoT Cloud supports many Arduino and third-party boards, as well as a number of Linux devices.
Arduino devices
The following Arduino boards can be used with IoT Cloud:
- MKR 1000 WiFi
- MKR WiFi 1010
- MKR WAN 1300
- MKR WAN 1310
- MKR GSM 1400
- MKR NB 1500
- Nano RP2040 Connect
- Nano 33 IoT
- Giga R1 WiFi
- Portenta H7
- Portenta H7 Lite Connected
- Portenta X8
- Nicla Vision
- Arduino Opta
Smartphones
You can use your phone as an IoT device in the Arduino Cloud.
Download the Arduino IoT Cloud Remote app for Android or iOS.
Check out the instructions at “Use Sensor Data From Your Phone”.
Third-party devices
Supported third-party devices can also be used:
- A wide range of Wi-fi enabled ESP32 and ESP8266 based devices. For a list of supported models, go to the Devices tab in IoT Cloud and click “Add”. Then click Set up a 3rd Party device and open the Select model dropdown for ESP32 or ESP8266.
- LoRaWAN® devices
Linux devices
You can configure Linux devices with the IoT Cloud in Manager for Linux.
The following Linux devices are supported:
- Arduino Pro Gateway
- Intel®-based platforms
- IEI TANK AIoT Dev Kit
- Arm®-based platforms
- Raspberry Pi
- BeagleBone
- UP Squared AI Vision Kit
- UP Squared Grove IoT Development Kit
