With every Oplà Kit comes a code to be redeemed. If you are having issues, please check the following:

• Select the monthly option when selecting the upgrade to Maker Plan. The code will not be valid if the yearly option is the one selected.
• Make sure you have not got any other plan active at the time you are redeeming the code.
• Take into account that 1s and Ls might look similar in the redemption code, so try the different combinations.

In case you are not sure how to redeem said code, check out this step by step tutorial:

1. Got to the Arduino Digital Store, and click on the Upgrade Plan button.

2. You will be taken to your plan settings in the Arduino Digital Store. Make sure you have the monthly option checked, then click in the purchase button under the Maker section.

3. If you are not logged in yet, you will be taken to the login page.

It is very important in this step to make sure you log in or are already logged in with the account that you want the code redeemed for, as this code has a one-time-only use.

5. You will then be taken to the Billing information page.

   

6. At the bottom of this page, you will find the area for code redemption, write it and click on Apply code.