Back to Arduino Support

Use your Engineering Kit board with MATLAB or Simulink

The Arduino Engineering Kit comes with MATLAB and Simulink licenses for use with the included MKR 1000 WiFi or Nano 33 IoT board.

Follow the installation instructions included in the online content for your kit:

Kit Chapter or lesson Note
Instructions for Engineering Kit Rev2 Unboxing and installations Scroll down and see 1.3 Installing the Tools.
Instructions for Engineering Kit Rev1 Introduction Scroll down and see 1.3 Tools.

You need to be signed into an account with access to the kit content. For more information, see Access and share course content.

Arduino IDE can be used to install the required drivers:

  1. Download and install the latest version of Arduino IDE.

  2. Install the Arduino SAMD Boards package. If you need help, see Add boards to Arduino IDE.

  3. Install the ArduinoMotorCarrier library. If you need help, see Add libraries to Arduino IDE.

  4. Restart your computer.

  5. Try using your board with MATLAB or Simulink again.

  6. If the issue persists, try reinstalling the MATLAB or Simulink application by following the above instructions.

If you still need help

If you still need help, contact us.

  • Last edited:
Was this article helpful?
Do you want to contribute? Visit the Github repository
Return to top

Didn’t find what you were looking for?

Arduino Docs

Tutorials, data sheets, guides and other technical documentation.

Arduino Forum

Connect with the community, get help with your project, and discuss everything Arduino.

Arduino Discord

There are a lot of Arduino enthusiasts who are more than willing to help out. Head over Discord to start a discussion.

Contact Arduino

Need help with a product, need to make an exchange, or can't find a question answered? Email us and we'll answer as soon as possible.