Arduino Help Center Help Center home page
Sign in
  1. Arduino Help Center
  2. Hardware Support
  3. Nano Family

Nano Family

  • Use the new sensor libraries for Nano 33 BLE Rev2 and Nano BLE Sense Rev2
  • Nano family overview
  • Select pin numbering for Nano ESP32 in Arduino IDE
  • Nano ESP32 is not compatible with ESP Rainmaker library
  • Reset the Arduino bootloader on the Nano ESP32
  • About the B1 and B0 pins on the Nano ESP32
  • Use Nano ESP32 with Arduino Cloud
  • About Nano ESP32 boards with inverted green and blue pins
  • Burn the bootloader on Arduino Nano 33 IoT
  • About the analog pins on Nano RP2040 Connect
  • Test the sensors on Nano 33 BLE Sense
  • Classic Nano is detected as unknown FT232R USB UART (Windows)
  • Reset the firmware on Nano RP2040 Connect
  • How to reduce power consumption on the Nano 33 BLE
  • Select the right processor for Arduino Nano
  • Control the RGB LED on Nano 33 BLE boards
  • Enable 5 V power on the VUSB or VBUS pin on Nano boards
  • Nano boards that can be powered directly with 3.3 V
  • Use the built-in sensors on Nano 33 BLE Sense
  • How to change the ADC resolution

Didn’t find what you were looking for?

Arduino Docs

Tutorials, data sheets, guides and other technical documentation.

Arduino Forum

Connect with the community, get help with your project, and discuss everything Arduino.

Arduino Discord

There are a lot of Arduino enthusiasts who are more than willing to help out. Head over Discord to start a discussion.

Contact Arduino

Need help with a product, need to make an exchange, or can't find a question answered? Email us and we'll answer as soon as possible.

Arduino Help Center